CHAIN LINK


 
 

Residential, Commercial, Industrial

 

 

 

 

 

 

 

Features and Benefits:

  • Zinc-coated steel framework that is thoroughly cleaned during the pre-treatment process, then color coated with a 3 mil minimum polyester layer for dual protection from corrosion.
  • All galvanized wire has a 15 mil minimum extruded polyvinyl chloride coating for dual protection from corrosion and the elements.
  • Fittings are made of galvanized steel with a 6 mil minimum of polymer coating for added protection.
  • Treating components with both zinc and an electrostatically applied color coating helps them provide years of protection and security.

 

 

Material Specifications:
 

Chain-Link Fabric (not all meshes available in all gauges)
Type: Spectra polyvinyl chloride extruded over zinc-coated steel wire per ASTM F 668 Class 1 or Spectra polyvinyl chloride extruded and adhered to zinc-coated steel wire per ASTM F 668 Class 2a
Gauge: 6, 9, 11, 12, and 14 gauge galvanized core wire
Mesh: 3/8", ½", 5/8", 1", 1-1/4", 1-3/4", 2" and 
2-1/4"
Heights: 3',42",4',5', 6', 7', 8', 10', 12', 16' and 20'
Selvage: Knuckled top and bottom up to 5' high, twisted and knuckled 6' to 20' high, except 1-1/4" mesh and smaller knuckled top and bottom
Colors: Forest Green, Midnight Black, Sierra Brown
Framework:  
Type 2: Spectra polyester resin, 3 mils minimum, over galvanized steel ASTM F 1043, Group 1C, with a minimum yield strength of 50,000 PSI. Protective coating per ASTM F 1043, external coating Type B, zinc with organic overcoat, 0.9 ounces per square foot minimum zinc coating with chromate conversion coating and verifiable polymer film
Colors: Forest Green, Midnight Black, SierraBrown
Top Rail  
Type 2: 1-5/8" O.D. Spectra DQ 40 pipe (0.111" wall thickness, 1.83 lb./ft.)
Line Posts  
Type 2: 2-3/8" O.D. Spectra DQ 40 pipe (0.130" wall thickness, 3.12 lb./ft.)
Terminal Posts  
Type 2: 2-7/8" O.D. Spectra DQ 40 pipe (0.160" wall thickness, 4.64 lb./ft.)
Swing Gates  
Fabric: same mesh and gauge as chain-link selected
Framework: 1-5/8" O.D. for gates up to 6' high or less 
1-7/8" O.D. for gates over 6' high
Fittings  
Tension and Brace Bands: Polymer coating, 6 mils minimum, over hot-dipped galvanized pressed steel
Caps, Eye Tops, Rail Ends: Polymer coating, 6 mils minimum, over hot-dipped galvanized pressed steel
Sleeves: Polymer coating, 6 mils minimum, over hot-dipped galvanized steel
Tie Wires: Polymer coating, 6 mils minimum, over zinc-coated steel wire